mihomo/docs/config.yaml

# port: 7890 # HTTP(S) 代理服务器端口
# socks-port: 7891 # SOCKS5 代理端口
mixed-port: 10801 # HTTP(S) 和 SOCKS 代理混合端口
# redir-port: 7892 # 透明代理端口，用于 Linux 和 MacOS

# Transparent proxy server port for Linux (TProxy TCP and TProxy UDP)
# tproxy-port: 7893

allow-lan: true # 允许局域网连接
bind-address: "*" # 绑定IP地址，仅作用于 allow-lan 为 true，'*'表示所有地址

#  find-process-mode has 3 values: always, strict, off
#  - always, 开启，强制匹配所有进程
#  - strict, 默认，由clash判断是否开启
#  - off, 不匹配进程，推荐在路由器上使用此模式
find-process-mode: strict

#  global-client-fingerprint:全局TLS指纹,优先低于proxy内的 client-fingerprint
#  accepts "chrome","firefox","safari","ios","random","none" options.
#  Utls is currently support TLS transport in TCP/grpc/WS/HTTP for VLESS/Vmess and trojan.
global-client-fingerprint: chrome

mode: rule

#自定义 geox-url
geox-url:
  geoip: "https://cdn.jsdelivr.net/gh/Loyalsoldier/v2ray-rules-dat@release/geoip.dat"
  geosite: "https://cdn.jsdelivr.net/gh/Loyalsoldier/v2ray-rules-dat@release/geosite.dat"
  mmdb: "https://cdn.jsdelivr.net/gh/Loyalsoldier/geoip@release/Country.mmdb"

log-level: debug # 日志等级 silent/error/warning/info/debug

ipv6: true # 开启 IPv6 总开关，关闭阻断所有 IPv6 链接和屏蔽 DNS 请求 AAAA 记录

external-controller: 0.0.0.0:9093 # RESTful API 监听地址
external-controller-tls: 0.0.0.0:9443 # RESTful API HTTPS 监听地址，需要配置 tls 部分配置文件
# secret: "123456" # `Authorization: Bearer ${secret}`

# tcp-concurrent: true # TCP并发连接所有IP, 将使用最快握手的TCP
external-ui: /path/to/ui/folder # 配置WEB UI目录，使用http://{{external-controller}}/ui 访问

# interface-name: en0 # 设置出口网卡

# routing-mark: 6666 # 配置 fwmark 仅用于Linux
experimental:

# 类似于 /etc/hosts, 仅支持配置单个 IP
hosts:
# '*.clash.dev': 127.0.0.1
# '.dev': 127.0.0.1
# 'alpha.clash.dev': '::1'

# Tun 配置
tun:
  enable: false
  stack: system # gvisor / lwip
  dns-hijack:
    - 0.0.0.0:53 # 需要劫持的 DNS
  # auto-detect-interface: true # 自动识别出口网卡
  # auto-route: true # 配置路由表
  # mtu: 9000 # 最大传输单元
  # strict_route: true # 将所有连接路由到tun来防止泄漏，但你的设备将无法其他设备被访问
  inet4_route_address: # 启用 auto_route 时使用自定义路由而不是默认路由
    - 0.0.0.0/1
    - 128.0.0.0/1
  inet6_route_address: # 启用 auto_route 时使用自定义路由而不是默认路由
    - "::/1"
    - "8000::/1"
  # endpoint_independent_nat: false # 启用独立于端点的 NAT
  # include_uid: # UID 规则仅在 Linux 下被支持，并且需要 auto_route
  # - 0
  # include_uid_range: # 限制被路由的的用户范围
  # - 1000-99999
  # exclude_uid: # 排除路由的的用户
  #- 1000
  # exclude_uid_range: # 排除路由的的用户范围
  # - 1000-99999

  # Android 用户和应用规则仅在 Android 下被支持
  # 并且需要 auto_route

  # include_android_user: # 限制被路由的 Android 用户
  # - 0
  # - 10
  # include_package: # 限制被路由的 Android 应用包名
  # - com.android.chrome
  # exclude_package: # 排除被路由的 Android 应用包名
  # - com.android.captiveportallogin

#ebpf配置
ebpf:
  auto-redir: # redirect 模式，仅支持 TCP
    - eth0
  redirect-to-tun: # UDP+TCP 使用该功能请勿启用 auto-route
    - eth0

# 嗅探域名 可选配置
sniffer:
  enable: false
  ## 对 redir-host 类型识别的流量进行强制嗅探
  ## 如：Tun、Redir 和 TProxy 并 DNS 为 redir-host 皆属于
  # force-dns-mapping: false
  ## 对所有未获取到域名的流量进行强制嗅探
  # parse-pure-ip: false
  # 是否使用嗅探结果作为实际访问，默认 true
  # 全局配置，优先级低于 sniffer.sniff 实际配置
  override-destination: false
  sniff:
    # TLS 默认如果不配置 ports 默认嗅探 443
    TLS:
    #  ports: [443, 8443]

    # 默认嗅探 80
    HTTP:
      # 需要嗅探的端口

      ports: [80, 8080-8880]
      # 可覆盖 sniffer.override-destination
      override-destination: true
  force-domain:
    - +.v2ex.com
  ## 对嗅探结果进行跳过
  # skip-domain:
  #   - Mijia Cloud
  # 需要嗅探协议
  # 已废弃，若 sniffer.sniff 配置则此项无效
  sniffing:
    - tls
    - http
  # 强制对此域名进行嗅探

  # 仅对白名单中的端口进行嗅探，默认为 443，80
  # 已废弃，若 sniffer.sniff 配置则此项无效
  port-whitelist:
    - "80"
    - "443"
    # - 8000-9999

# shadowsocks,vmess 入口配置（传入流量将和socks,mixed等入口一样按照mode所指定的方式进行匹配处理）
# ss-config: ss://2022-blake3-aes-256-gcm:vlmpIPSyHH6f4S8WVPdRIHIlzmB+GIRfoH3aNJ/t9Gg=@:23456
# vmess-config: vmess://1:9d0cb9d0-964f-4ef6-897d-6c6b3ccf9e68@:12345

# tuic服务器入口（传入流量将和socks,mixed等入口一样按照mode所指定的方式进行匹配处理）
#tuic-server:
#  enable: true
#  listen: 127.0.0.1:10443
#  token:
#    - TOKEN
#  certificate: ./server.crt
#  private-key: ./server.key
#  congestion-controller: bbr
#  max-idle-time: 15000
#  authentication-timeout: 1000
#  alpn:
#    - h3
#  max-udp-relay-packet-size: 1500

tunnels:
  # one line config
  - tcp/udp,127.0.0.1:6553,114.114.114.114:53,proxy
  - tcp,127.0.0.1:6666,rds.mysql.com:3306,vpn
  # full yaml config
  - network: [tcp, udp]
    address: 127.0.0.1:7777
    target: target.com
    proxy: proxy

profile:
  # 存储select选择记录
  store-selected: false

  # 持久化fake-ip
  store-fake-ip: true

# DNS配置
dns:
  enable: false # 关闭将使用系统 DNS
  prefer-h3: true # 开启 DoH 支持 HTTP/3，将并发尝试
  listen: 0.0.0.0:53 # 开启 DNS 服务器监听
  # ipv6: false # false 将返回 AAAA 的空结果

  # 用于解析 nameserver，fallback 以及其他DNS服务器配置的，DNS 服务域名
  # 只能使用纯 IP 地址，可使用加密 DNS
  default-nameserver:
    - 114.114.114.114
    - 8.8.8.8
    - tls://1.12.12.12:853
    - tls://223.5.5.5:853
  enhanced-mode: fake-ip # or redir-host

  fake-ip-range: 198.18.0.1/16 # fake-ip 池设置

  # use-hosts: true # 查询 hosts

  # 配置不使用fake-ip的域名
  # fake-ip-filter:
  #   - '*.lan'
  #   - localhost.ptlogin2.qq.com

  # DNS主要域名配置
  # 支持 UDP，TCP，DoT，DoH，DoQ
  # 这部分为主要 DNS 配置，影响所有直连，确保使用对大陆解析精准的 DNS
  nameserver:
    - 114.114.114.114 # default value
    - 8.8.8.8 # default value
    - tls://223.5.5.5:853 # DNS over TLS
    - https://doh.pub/dns-query # DNS over HTTPS
    - https://dns.alidns.com/dns-query#h3=true # 强制 HTTP/3，与 perfer-h3 无关，强制开启 DoH 的 HTTP/3 支持，若不支持将无法使用
    - https://mozilla.cloudflare-dns.com/dns-query#DNS&h3=true # 指定策略组和使用 HTTP/3
    - dhcp://en0 # dns from dhcp
    - quic://dns.adguard.com:784 # DNS over QUIC
    # - '8.8.8.8#en0' # 兼容指定DNS出口网卡

  # 当配置 fallback 时，会查询 nameserver 中返回的 IP 是否为 CN，非必要配置
  # 当不是 CN，则使用 fallback 中的 DNS 查询结果
  # 确保配置 fallback 时能够正常查询
  # fallback:
  #   - tcp://1.1.1.1
  #   - 'tcp://1.1.1.1#ProxyGroupName' # 指定 DNS 过代理查询，ProxyGroupName 为策略组名或节点名，过代理配置优先于配置出口网卡，当找不到策略组或节点名则设置为出口网卡

  # 专用于节点域名解析的 DNS 服务器，非必要配置项
  # 配置服务器若查询失败将使用 nameserver，非并发查询
  # proxy-server-nameserver:
  # - https://dns.google/dns-query
  # - tls://one.one.one.one

  # 配置 fallback 使用条件
  # fallback-filter:
  #   geoip: true # 配置是否使用 geoip
  #   geoip-code: CN # 当 nameserver 域名的 IP 查询 geoip 库为 CN 时，不使用 fallback 中的 DNS 查询结果
  #   配置强制 fallback，优先于 IP 判断，具体分类自行查看 geosite 库
  #   geosite:
  #     - gfw
  #   如果不匹配 ipcidr 则使用 nameservers 中的结果
  #   ipcidr:
  #     - 240.0.0.0/4
  #   domain:
  #     - '+.google.com'
  #     - '+.facebook.com'
  #     - '+.youtube.com'

  # 配置查询域名使用的 DNS 服务器
  nameserver-policy:
    #   'www.baidu.com': '114.114.114.114'
    #   '+.internal.crop.com': '10.0.0.1'
    "geosite:cn": "https://doh.pub/dns-query"
    "www.baidu.com": [https://doh.pub/dns-query,https://dns.alidns.com/dns-query]
proxies:
  # Shadowsocks
  # cipher支持:
  #   aes-128-gcm aes-192-gcm aes-256-gcm
  #   aes-128-cfb aes-192-cfb aes-256-cfb
  #   aes-128-ctr aes-192-ctr aes-256-ctr
  #   rc4-md5 chacha20-ietf xchacha20
  #   chacha20-ietf-poly1305 xchacha20-ietf-poly1305
  #   2022-blake3-aes-128-gcm 2022-blake3-aes-256-gcm 2022-blake3-chacha20-poly1305
  - name: "ss1"
    type: ss
    server: server
    port: 443
    cipher: chacha20-ietf-poly1305
    password: "password"
    # udp: true
    # udp-over-tcp: false
    # ip-version: ipv4 # 设置节点使用 IP 版本，可选：dual，ipv4，ipv6，ipv4-prefer，ipv6-prefer。默认使用 dual
    # ipv4：仅使用 IPv4  ipv6：仅使用 IPv6
    # ipv4-prefer：优先使用 IPv4 对于 TCP 会进行双栈解析，并发链接但是优先使用 IPv4 链接,
    # UDP 则为双栈解析，获取结果中的第一个 IPv4
    # ipv6-prefer 同 ipv4-prefer
    # 现有协议都支持此参数，TCP 效果仅在开启 tcp-concurrent 生效
  - name: "ss2"
    type: ss
    server: server
    port: 443
    cipher: chacha20-ietf-poly1305
    password: "password"
    plugin: obfs
    plugin-opts:
      mode: tls # or http
      # host: bing.com

  - name: "ss3"
    type: ss
    server: server
    port: 443
    cipher: chacha20-ietf-poly1305
    password: "password"
    plugin: v2ray-plugin
    plugin-opts:
      mode: websocket # no QUIC now
      # tls: true # wss
      # 可使用 openssl x509 -noout -fingerprint -sha256 -inform pem -in yourcert.pem 获取
      # 配置指纹将实现 SSL Pining 效果
      # fingerprint: xxxx
      # skip-cert-verify: true
      # host: bing.com
      # path: "/"
      # mux: true
      # headers:
      #   custom: value

  - name: "ss4"
    type: ss
    server: server
    port: 443
    cipher: chacha20-ietf-poly1305
    password: "password"
    plugin: shadow-tls
    plugin-opts:
      host: "cloud.tencent.com"
      password: "shadow_tls_password"
      version: 2 # support 1/2/3

  # vmess
  # cipher支持 auto/aes-128-gcm/chacha20-poly1305/none
  - name: "vmess"
    type: vmess
    server: server
    port: 443
    uuid: uuid
    alterId: 32
    cipher: auto
    # udp: true
    # tls: true
    # fingerprint: xxxx
    # client-fingerprint: chrome    # Available: "chrome","firefox","safari","ios","random", currently only support TLS transport in TCP/GRPC/WS/HTTP for VLESS/Vmess and trojan.
    # skip-cert-verify: true
    # servername: example.com # priority over wss host
    # network: ws
    # ws-opts:
    #   path: /path
    #   headers:
    #     Host: v2ray.com
    #   max-early-data: 2048
    #   early-data-header-name: Sec-WebSocket-Protocol

  - name: "vmess-h2"
    type: vmess
    server: server
    port: 443
    uuid: uuid
    alterId: 32
    cipher: auto
    network: h2
    tls: true
    # fingerprint: xxxx
    h2-opts:
      host:
        - http.example.com
        - http-alt.example.com
      path: /

  - name: "vmess-http"
    type: vmess
    server: server
    port: 443
    uuid: uuid
    alterId: 32
    cipher: auto
    # udp: true
    # network: http
    # http-opts:
    #   # method: "GET"
    #   # path:
    #   #   - '/'
    #   #   - '/video'
    #   # headers:
    #   #   Connection:
    #   #     - keep-alive
    # ip-version: ipv4 # 设置使用 IP 类型偏好，可选：ipv4，ipv6，dual，默认值：dual

  - name: vmess-grpc
    server: server
    port: 443
    type: vmess
    uuid: uuid
    alterId: 32
    cipher: auto
    network: grpc
    tls: true
    # fingerprint: xxxx
    servername: example.com
    # skip-cert-verify: true
    grpc-opts:
      grpc-service-name: "example"
    # ip-version: ipv4

  # socks5
  - name: "socks"
    type: socks5
    server: server
    port: 443
    # username: username
    # password: password
    # tls: true
    # fingerprint: xxxx
    # skip-cert-verify: true
    # udp: true
    # ip-version: ipv6

  # http
  - name: "http"
    type: http
    server: server
    port: 443
    # username: username
    # password: password
    # tls: true # https
    # skip-cert-verify: true
    # sni: custom.com
    # fingerprint: xxxx # 同 experimental.fingerprints 使用 sha256 指纹，配置协议独立的指纹，将忽略 experimental.fingerprints
    # ip-version: dual

  # Snell
  # Beware that there's currently no UDP support yet
  - name: "snell"
    type: snell
    server: server
    port: 44046
    psk: yourpsk
    # version: 2
    # obfs-opts:
    # mode: http # or tls
    # host: bing.com

  # Trojan
  - name: "trojan"
    type: trojan
    server: server
    port: 443
    password: yourpsk
    # client-fingerprint: random # Available: "chrome","firefox","safari","random","none"
    # fingerprint: xxxx
    # udp: true
    # sni: example.com # aka server name
    # alpn:
    #   - h2
    #   - http/1.1
    # skip-cert-verify: true

  - name: trojan-grpc
    server: server
    port: 443
    type: trojan
    password: "example"
    network: grpc
    sni: example.com
    # skip-cert-verify: true
    # fingerprint: xxxx
    udp: true
    grpc-opts:
      grpc-service-name: "example"

  - name: trojan-ws
    server: server
    port: 443
    type: trojan
    password: "example"
    network: ws
    sni: example.com
    # skip-cert-verify: true
    # fingerprint: xxxx
    udp: true
    # ws-opts:
    # path: /path
    # headers:
    #   Host: example.com

  - name: "trojan-xtls"
    type: trojan
    server: server
    port: 443
    password: yourpsk
    flow: "xtls-rprx-direct" # xtls-rprx-origin xtls-rprx-direct
    flow-show: true
    # udp: true
    # sni: example.com # aka server name
    # skip-cert-verify: true
    # fingerprint: xxxx

  # vless
  - name: "vless-tcp"
    type: vless
    server: server
    port: 443
    uuid: uuid
    network: tcp
    servername: example.com # AKA SNI
    # flow: xtls-rprx-direct # xtls-rprx-origin  # enable XTLS
    # skip-cert-verify: true
    # fingerprint: xxxx
    # client-fingerprint: random # Available: "chrome","firefox","safari","random","none"

  - name: "vless-ws"
    type: vless
    server: server
    port: 443
    uuid: uuid
    udp: true
    tls: true
    network: ws
    # client-fingerprint: random # Available: "chrome","firefox","safari","random","none"
    servername: example.com # priority over wss host
    # skip-cert-verify: true
    # fingerprint: xxxx
    ws-opts:
      path: "/"
      headers:
        Host: example.com

  #hysteria
  - name: "hysteria"
    type: hysteria
    server: server.com
    port: 443
    auth_str: yourpassword # 将会在未来某个时候删除
    # auth-str: yourpassword
    # obfs: obfs_str
    # alpn:
    #   - h3
    protocol: udp # 支持 udp/wechat-video/faketcp
    up: "30 Mbps" # 若不写单位，默认为 Mbps
    down: "200 Mbps" # 若不写单位，默认为 Mbps
    # sni: server.com
    # skip-cert-verify: false
    # recv_window_conn: 12582912 # 将会在未来某个时候删除
    # recv-window-conn: 12582912
    # recv_window: 52428800 # 将会在未来某个时候删除
    # recv-window: 52428800
    # ca: "./my.ca"
    # ca_str: "xyz" # 将会在未来某个时候删除
    # ca-str: "xyz"
    # disable_mtu_discovery: false
    # fingerprint: xxxx
    # fast-open: true # 支持 TCP 快速打开，默认为 false

  - name: "wg"
    type: wireguard
    server: 162.159.192.1
    port: 2480
    ip: 172.16.0.2
    ipv6: fd01:5ca1:ab1e:80fa:ab85:6eea:213f:f4a5
    private-key: eCtXsJZ27+4PbhDkHnB923tkUn2Gj59wZw5wFA75MnU=
    public-key: Cr8hWlKvtDt7nrvf+f0brNQQzabAqrjfBvas9pmowjo=
    udp: true
  #    reserved: 'U4An'
  - name: tuic
    server: www.example.com
    port: 10443
    type: tuic
    token: TOKEN
    # ip: 127.0.0.1 # for overwriting the DNS lookup result of the server address set in option 'server'
    # heartbeat-interval: 10000
    # alpn: [h3]
    # disable-sni: true
    reduce-rtt: true
    # request-timeout: 8000
    udp-relay-mode: native # Available: "native", "quic". Default: "native"
    # congestion-controller: bbr # Available: "cubic", "new_reno", "bbr". Default: "cubic"
    # max-udp-relay-packet-size: 1500
    # fast-open: true
    # skip-cert-verify: true
    # max-open-streams: 20 # default 100, too many open streams may hurt performance

  # ShadowsocksR
  # The supported ciphers (encryption methods): all stream ciphers in ss
  # The supported obfses:
  #   plain http_simple http_post
  #   random_head tls1.2_ticket_auth tls1.2_ticket_fastauth
  # The supported supported protocols:
  #   origin auth_sha1_v4 auth_aes128_md5
  #   auth_aes128_sha1 auth_chain_a auth_chain_b
  - name: "ssr"
    type: ssr
    server: server
    port: 443
    cipher: chacha20-ietf
    password: "password"
    obfs: tls1.2_ticket_auth
    protocol: auth_sha1_v4
    # obfs-param: domain.tld
    # protocol-param: "#"
    # udp: true

proxy-groups:
  # 代理链，若落地协议支持 UDP over TCP 则可支持 UDP
  # Traffic: clash <-> http <-> vmess <-> ss1 <-> ss2 <-> Internet
  - name: "relay"
    type: relay
    proxies:
      - http
      - vmess
      - ss1
      - ss2

  # url-test 将按照 url 测试结果使用延迟最低节点
  - name: "auto"
    type: url-test
    proxies:
      - ss1
      - ss2
      - vmess1
    # tolerance: 150
    # lazy: true
    url: "https://cp.cloudflare.com/generate_204"
    interval: 300

  # fallback 将按照 url 测试结果按照节点顺序选择
  - name: "fallback-auto"
    type: fallback
    proxies:
      - ss1
      - ss2
      - vmess1
    url: "https://cp.cloudflare.com/generate_204"
    interval: 300

  # load-balance 将按照算法随机选择节点
  - name: "load-balance"
    type: load-balance
    proxies:
      - ss1
      - ss2
      - vmess1
    url: "https://cp.cloudflare.com/generate_204"
    interval: 300
    # strategy: consistent-hashing # 可选 round-robin 和 sticky-sessions

  # select 用户自行选择节点
  - name: Proxy
    type: select
    # disable-udp: true
    proxies:
      - ss1
      - ss2
      - vmess1
      - auto

  # 配置指定 interface-name 和 fwmark 的 DIRECT
  - name: en1
    type: select
    interface-name: en1
    routing-mark: 6667
    proxies:
      - DIRECT

  - name: UseProvider
    type: select
    filter: "HK|TW" # 正则表达式，过滤 provider1 中节点名包含 HK 或 TW
    use:
      - provider1
    proxies:
      - Proxy
      - DIRECT

# Clash 格式的节点或支持 *ray 的分享格式
proxy-providers:
  provider1:
    type: http
    url: "url"
    interval: 3600
    path: ./provider1.yaml
    health-check:
      enable: true
      interval: 600
      # lazy: true
      url: https://cp.cloudflare.com/generate_204
  test:
    type: file
    path: /test.yaml
    health-check:
      enable: true
      interval: 36000
      url: https://cp.cloudflare.com/generate_204
rule-providers:
  rule1:
    behavior: classical # domain ipcidr
    interval: 259200
    path: /path/to/save/file.yaml
    type: http
    url: "url"
  rule2:
    behavior: classical
    interval: 259200
    path: /path/to/save/file.yaml
    type: file
rules:
  - RULE-SET,rule1,REJECT
  - DOMAIN-SUFFIX,baidu.com,DIRECT
  - DOMAIN-KEYWORD,google,ss1
  - IP-CIDR,1.1.1.1/32,ss1
  - IP-CIDR6,2409::/64,DIRECT
  - SUB-RULE,(OR,((NETWORK,TCP),(NETWORK,UDP))),sub-rule-name1 # 当满足条件是 TCP 或 UDP 流量时，使用名为 sub-rule-name1 当规则集
  - SUB-RULE,(AND,((NETWORK,UDP))),sub-rule-name2
# 定义多个子规则集，规则将以分叉匹配，使用 SUB-RULE 使用
#                                               google.com(not match)--> baidu.com(match)
#                                                /                                ｜
#                                               /                                 ｜
#  https://baidu.com  --> rule1 --> rule2 --> sub-rule-name1(match tcp)          使用 DIRECT
#
#
#                                              google.com(not match)--> baidu.com(not match)
#                                                /                            ｜
#                                               /                             ｜
#  dns 1.1.1.1  --> rule1 --> rule2 --> sub-rule-name1(match udp)         sub-rule-name2(match udp)
#                                                                             ｜
#                                                                             ｜
#                                                                 使用 REJECT <-- 1.1.1.1/32(match)
#

sub-rules:
  sub-rule-name1:
    - DOMAIN,google.com,ss1
    - DOMAIN,baidu.com,DIRECT
  sub-rule-name2:
    - IP-CIDR,1.1.1.1/32,REJECT
    - IP-CIDR,8.8.8.8/32,ss1
    - DOMAIN,dns.alidns.com,REJECT

tls:
  certificate: string # 证书 PEM 格式，或者 证书的路径
  private-key: string # 证书对应的私钥 PEM 格式，或者私钥路径
  # 自定义证书验证，将加入 Clash 证书验证中，绝大多数 TLS 相关支持，如：DNS
  # 可用于自定义证书的验证
  custom-certificates:
    - certificate: string # 证书 PEM 格式，或者 证书的路径
      private-key: string # 证书对应的私钥 PEM 格式，或者私钥路径

# 流量入站
listeners:
  - name: socks5-in-1
    type: socks
    port: 10808
    #listen: 0.0.0.0 # 默认监听 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理
    # udp: false # 默认 true

  - name: http-in-1
    type: http
    port: 10809
    listen: 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)

  - name: mixed-in-1
    type: mixed #  HTTP(S) 和 SOCKS 代理混合
    port: 10810
    listen: 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)
    # udp: false # 默认 true

  - name: reidr-in-1
    type: redir
    port: 10811
    listen: 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)

  - name: tproxy-in-1
    type: tproxy
    port: 10812
    listen: 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)
    # udp: false # 默认 true

  - name: shadowsocks-in-1
    type: shadowsocks
    port: 10813
    listen: 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)
    password: vlmpIPSyHH6f4S8WVPdRIHIlzmB+GIRfoH3aNJ/t9Gg=
    cipher: 2022-blake3-aes-256-gcm

  - name: vmess-in-1
    type: vmess
    port: 10814
    listen: 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)
    users:
      - username: 1
        uuid: 9d0cb9d0-964f-4ef6-897d-6c6b3ccf9e68
        alterId: 1

  - name: tuic-in-1
    type: tuic
    port: 10815
    listen: 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)
    #  token:
    #    - TOKEN
    #  certificate: ./server.crt
    #  private-key: ./server.key
    #  congestion-controller: bbr
    #  max-idle-time: 15000
    #  authentication-timeout: 1000
    #  alpn:
    #    - h3
    #  max-udp-relay-packet-size: 1500

  - name: tunnel-in-1
    type: tunnel
    port: 10816
    listen: 0.0.0.0
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)
    network: [tcp, udp]
    target: target.com

  - name: tun-in-1
    type: tun
    # rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
    # proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)
    stack: system # gvisor / lwip
    dns-hijack:
      - 0.0.0.0:53 # 需要劫持的 DNS
    # auto-detect-interface: false # 自动识别出口网卡
    # auto-route: false # 配置路由表
    # mtu: 9000 # 最大传输单元
    inet4-address: # 必须手动设置ipv4地址段
      - 198.19.0.1/30
    inet6-address: # 必须手动设置ipv6地址段
      - "fdfe:dcba:9877::1/126"
    # strict_route: true # 将所有连接路由到tun来防止泄漏，但你的设备将无法其他设备被访问
    #    inet4_route_address: # 启用 auto_route 时使用自定义路由而不是默认路由
    #      - 0.0.0.0/1
    #      - 128.0.0.0/1
    #    inet6_route_address: # 启用 auto_route 时使用自定义路由而不是默认路由
    #      - "::/1"
    #      - "8000::/1"
    # endpoint_independent_nat: false # 启用独立于端点的 NAT
    # include_uid: # UID 规则仅在 Linux 下被支持，并且需要 auto_route
    # - 0
    # include_uid_range: # 限制被路由的的用户范围
    # - 1000-99999
    # exclude_uid: # 排除路由的的用户
    #- 1000
    # exclude_uid_range: # 排除路由的的用户范围
    # - 1000-99999

    # Android 用户和应用规则仅在 Android 下被支持
    # 并且需要 auto_route

    # include_android_user: # 限制被路由的 Android 用户
    # - 0
    # - 10
    # include_package: # 限制被路由的 Android 应用包名
    # - com.android.chrome
    # exclude_package: # 排除被路由的 Android 应用包名
    # - com.android.captiveportallogin